Whole-Home Remodeling in Greater Seattle & the Eastside
One company handles framing, electrical, plumbing, tile, and finish work — under one contract, with no subcontractors.
- All trades in-house
- W-2 crew only
- Daily WhatsApp updates
- WA Lic #ANYVIHR768KB
Whole-home remodeling — one crew, every trade
Whole-home remodeling in Greater Seattle and the Eastside means one company handles framing, electrical, plumbing, tile, and finish work — under one contract, with no subcontractors.
That is the core of how Anyvision works. Every person showing up on your job site is a W-2 employee of this company. Not a plumber you have never met, not a tile sub who has four other jobs running. The same crew. Every day.
MEP — mechanical, electrical, and plumbing — is the set of three licensed trades inside every home. Anyvision performs all three in-house. That single fact changes how the entire project runs.
A whole-home remodel under a single-source accountability model means one company owns the outcome. When one company is responsible for every part of a project, there is no question about who corrects a problem. We correct it.
What full-scope renovation looks like in occupied homes
Occupied home renovation requires daily schedule coordination that only works when all trades answer to the same company.
The schedule slips in the middle
- The electrician is scheduled for Thursday.
- The plumber has not finished Tuesday’s rough-in — the drain relocation ran long.
- Thursday does not happen. The electrician books another job on Friday.
- The next available Thursday is ten days out.
- You are living with exposed framing in two rooms, told “a few more days” three times.
The crew shifts with the schedule
- Every trade on site is an Anyvision employee.
- That Thursday conversation ends in ten minutes.
- Chase reassigns. The schedule shifts, but the crew shifts with it.
- No gap between trades, and no inspection waiting on a handoff.
- One company owns the outcome at every stage.
Most homes across the region built between 1990 and 2010 were designed as closed floor plans. A full renovation of those homes typically involves structural changes, electrical panel upgrades, and plumbing relocations — all happening in sequence. When each of those trades is on a separate contract, sequencing depends on everyone arriving when scheduled.
The schedule does not slip at the end. It slips in the middle, when one trade cannot start because the previous one ran long. Change order risk — the chance that unplanned additions add cost — climbs with every unresolved handoff.
Anyvision dispatches from its Redmond office via the SR-520 and I-405 corridors. Crews reach Overlake, Education Hill, Grass Lawn, and neighborhoods across Seattle and the Eastside without the half-day scheduling gaps that arise when trades are drawn from a wide regional pool.
Chase Briga manages every whole-home project directly
If you have a question about the tile layout, you ask Chase. If something needs to change mid-build, Chase handles it.
Every complete home remodel design-build project at Anyvision has one point of contact. This is not a model where a salesperson hands you to a project manager who hands you to a crew lead. Chase runs the project.
For homeowners doing a general contractor whole-home renovation, that directness eliminates the communication layer where most mid-project problems start. Decisions happen in real time, not after three messages pass through two intermediaries.
The 24-hour response commitment applies to active projects, not just new inquiries. You will not spend a workday waiting to find out what is happening in your own house.
How the WhatsApp daily update system keeps you current
Every Anyvision client receives a same-day photo or video on every day the crew is on-site.
What you receive. Each update shows what was physically completed that day. Not a written summary — an actual photo or short video from the job site. Framing completed, tile set, electrical rough-in inspected. You see it the same day it happens.
Why it matters in an occupied home. When you are living in a house during construction, information is not optional. You need to know which areas are active, what the crew will be doing tomorrow, and whether the project is on schedule. The daily update answers all three without requiring you to make a call.
How it connects to decision-making. If a material arrives damaged or a layout question comes up mid-build, Chase sends a photo of the exact situation and gets a decision in the same conversation. No waiting, no miscommunication about what is in front of the crew.
This is not a premium communication upgrade. It is how every Anyvision project runs, from the first day of demolition to the final walk-through.
What “all in-house” actually covers
Anyvision’s W-2 crew performs every major trade on a whole-home renovation under WA Lic #ANYVIHR768KB.
Framing
Structural wall modifications, load-bearing work, and new openings.
Mechanical
HVAC duct rerouting and ventilation system updates.
Electrical
Panel upgrades, circuit additions, fixture rough-in and trim.
Plumbing
Supply and drain line relocations, fixture rough-in, and connections.
Tile
Floor tile, shower assemblies, and backsplash work.
Finish carpentry
Cabinetry installation, trim, and built-ins.
How a whole-home project runs
Complimentary 3D design
You see the finished space — cabinet profiles, countertop material, tile pattern, lighting placement — before demolition begins. Changes at that stage cost nothing.
Permit and pre-construction
Washington State Residential Building Code requires licensed inspections on all MEP work. Every inspection on an Anyvision project is filed under our license, by our crew.
Phased demolition
Work is contained and sequenced so the rest of the home stays accessible while the crew moves through the active zone.
In-house trades in sequence
Framing, mechanical, electrical, plumbing, tile, and finish carpentry — all performed by the same crew, with no handoff between contracts.
Inspection and final walk-through
Each inspection is scheduled and passed before the next phase proceeds, through to the final walk-through.
Full-home renovations across Greater Seattle & the Eastside
Anyvision completes whole-house renovation work across Redmond, Seattle, Bellevue, Kirkland, and Sammamish.
From Eastside communities like Overlake, Education Hill, and Grass Lawn to Seattle neighborhoods including Queen Anne, Capitol Hill, and West Seattle, we bring a single-crew approach to your project. Projects range from full-floor renovations combining kitchens and bathrooms to complete gut renovations on 1990s and 2000s closed-plan homes.
Anyvision works in occupied homes and vacant properties. If your project involves more than one trade, it is handled under one contract.
- Redmond
- Seattle
- Bellevue
- Kirkland
- Sammamish
- Overlake
- Queen Anne
- West Seattle
Get the full-scope conversation started
An in-house MEP remodeling conversation starts with scope, timeline, and which trades your project involves.
Include the rooms involved, whether you will be living in the home during construction, and a rough timeline. The complimentary 3D design process starts from there.
Prefer to write? Email info@anyvision-homeremodeling.com or submit your project details through the estimate form. We respond within 24 hours.
Whole-home remodeling questions
Do you subcontract any of the trades?
No. Framing, mechanical, electrical, plumbing, tile, and finish carpentry are all performed by Anyvision W-2 employees under WA Lic #ANYVIHR768KB. There is no outside framing sub, no outside plumber, and no tile crew you meet on demo day.
Can I live in the house during a whole-home remodel?
Yes. Anyvision works in occupied homes regularly. Demolition is phased and the work zone is contained so the rest of the house stays accessible.
You also receive a daily WhatsApp photo or video showing what was completed, so you know which areas are active and what happens next.
Who is my point of contact during the project?
Chase Briga, the founder, runs every whole-home project directly. There is no handoff from a salesperson to a project manager to a crew lead — decisions happen in real time rather than passing through intermediaries.
The 24-hour response commitment applies to active projects, not just new inquiries.
Why does the schedule slip on multi-contractor projects?
It slips in the middle, not at the end. When one trade runs long, the next cannot start, and by the time the delay surfaces you have been living around a partial demolition for two weeks.
When every trade answers to the same company, that reassignment takes minutes instead of days.
Is the 3D design included?
Yes, on every project and before any demolition begins. You see cabinet profiles, countertop material, tile pattern, and lighting placement in the rendering first. Changes at that stage cost nothing.